Frame repair

OK..  So I found some holes in my frame. These are not a huge problem as they are on a part that provides one of the 18 body mounts.  As seen in the photos, there are small rust through holes.

 These are the rust through on the frame. The ONLY places where it rusted all the way through.

 First I ground down an area around to get a good place to braze on a steel patch.

I brazed on 3 pieces of steel. 

Final brazing is done.  All brazing is ground down smooth.

I then ground down the braze to make it as smooth as I could.

Sprayed it with self etching primer

All primed now.

Add Nitro-Stan to finish it off.

Needs to be final sanded.

All set.